Mercury HP960C-S 6KVA UPS
SKU
MP9106S
In stock
Specifications
Power | 6KVA / 4200W |
Voltage range | 176 ±5VAC~276 ±5VAC |
Frequency | 46~54Hz ±0.5Hz, or 56~64Hz ±0.5Hz auto-sensing |
Input phase | Single-phase |
Power factor | ≥0.98 |
Voltage range | 220VAC ±1% |
Output phase | Single phase |
se | |
Frequency | 50Hz ±0.2% (battery mode) |
THD | < 2% (Linear load); < 6% (non-Linear load) |
Overload | 105%~130% 10min turn to Bypass mode, > 130% 1s turn to Bypass mode |
Crest factor | 3:1 (max) |
Waveform | Pure sine wave |
Transfer time | 0ms (AC mode – Battery mode) 0ms (AC mode – Bypass mode) |
Efficiency | ≥88% |
AC mode | 5 cycles turn off the inverter, no transfer to Bypass, provide alarm. |
Battery mode | 5 cycles turn off the inverter, provide an alarm. |
Bypass mode | Input fuse has blown or break action. |
Battery Model | 12V sealed lead acid maintenance-free |
DC voltage | 240VDC |
Configuration | 20x 12V/8.2AH |
Backup time | 20min (half load) / 7min (full load) |
Charge current | 1A (standard unit) / 5A (long time unit) |
Recharge time | 90% capacity after 8hrs charging |
Communication Interface | RS232; SNMP (optional) |
Parallel Port | Parallel availability for redundancy and load sharing up to three-units |
LCD Indication | Input voltage/frequency; battery voltage; output voltage/frequency; load watt/VA value & percent; inverter temperature; operation mode such as “on batt” or “on bypass” |
LED Indication | Green: normal operation; Yellow: warning condition Red: abnormal operation |
Noise level | ≤ 55dB |
Temperature | 0~40˚C; 0 ~ 40˚C (storage temperature) |
Humidity | 0~95% (non-condensing) |
Altitude | < 1500m |
Weight Net/Gross | 89/104kg (standard unit); 34/48kg (long time unit) |
Dimension (WxDxH) | 270 x 570 x 720mm |
Packaging (WxDxH) | 370 x 670 x 940mm |
Categories: Default Category, Power, UPS, Mercury
Mercury 6kva Online UPS Single Phase HP960C-S
Application: Small network, servers and other IT equipment High frequency and double conversion on-line technology Fully digitized microprocessor control Wide input voltage range UPS startup without battery Cold start Advanced battery management Advanced battery charge in UPS off mode Lightning and surge protection Short circuit and surge protection Fan speed auto control when loads varyOptional extension battery pack Load capacity display Smart RS232 communication with monitoring software Optional SNMP card slot |
Log In